Dejavoo Z: Hardware Check

DejavooZ: Hardware detect and test

Last Updated: May 31, 2024

What's in this article?

Method 1
Method 2
1. Restart terminal by holding the Power button(print receipt button) for 4 seconds then release (Bottom-Left button)
2. On System Initializing screen, press Red X until hear two beeps and see Program Manager
3. Press 0 (Zero) to enter the menu
4. Enter password 0106 and press the Green Enter key
5. Press down arrow to scroll through them menu
  On Touchscreen models the # or . will be the down arrow and the ↑ will be the Up arrow
  Down arrow options UP arrow options
6. Select HW detect by pressing the corresponding number
7. Terminal will check/restart hardware and return to main screen.
1. Restart terminal by holding the Power button(print receipt button) for 4 seconds then release (Bottom-Left button)
2. On System Initializing screen, press Red X Repeatedly as fast as you can until you see Program Manager
3. Press 0 (Zero) to enter the menu
4. Press down arrow to scroll through them menu
  On Touchscreen models the # or . will be the down arrow and the ↑ will be the Up arrow
  Down arrow options UP arrow options
5. Select HW detect by pressing the corresponding number
6. Terminal will check/restart hardware
7. When the screen changes press any key to go back to the System Menu screen (It says Please any key but it is supposed to be press)
8. Press the Red X key to go back to the Program Manager screen
9. Press Enter to load the terminal back to the main screen

Help us improve. Was this article helpful?