The B200 and B250 readers connect to devices via Bluetooth Low Energy and do not need to be paired within the settings of the device. To connect, follow the steps below:

1. Select Reader in the upper right hand corner to connect to an available card reader. 

   

2. You’ll find your card reader according to the last four digits of the serial number. E.g. Swift-1234 

   

3. Once a card reader has been selected, it will attempt to connect to the device. When the reader has connected to the device, you may swipe or dip the credit card. 

   

4. After the reader has been connected with a device, the reader will automatically connect when turned on.